Allconnex Water operates 10 recycled water filling stations in the Gold Coast district. All filling stations are accessed through an automated system which requires an access device from Allconnex Water. Filling stations are configured with a 63mm (2½ inch) male camlock fitting.

For information on becoming a registered recycled water carrier visit Recycled water for industry.

Locations

Site	Address	Access Requirements
Tugun	Access through Gold Coast City Council Waste Disposal Facility Boyd Street, Tugun	24 hour access Security access car 63mm camlock fitting
Currumbin	Car Park at clubhouse Salk Oval Sarawak Avenue, Currumbin	24 hour access 63mm camlock fitting
Elanora	Elanora Wastewater Treatment Plan End of Tallebudgera Drive, Elanora	24 hour access Security access card 63mm camlock fitting
Merrimac	Merrimac Wastewater Treatment Plan Boowaggon Road, Merrimac	24 hour access Security access card 63mm camlock fitting
Benowa	Old Wastewater Treatment Plan Racecourse Drive, Benowa	24 hour access Security access card 63mm camlock fitting
Parkwood	Beside Sharks Junior Rugby League Club Access road off Musgrave Avenue	24 hour access 63mm camlock fitting
Coombabah	Wastewater Treatment Plan End of Shelter Road, Coombabah	6am-6pm Security access card for 24 hour access
Runaway Bay	Opposite Runaway Bay Sports Supercentre Sports Drive, Runaway Bay	24 hour access 63mm camlock fitting
Pimpama	Wastewater Treatment Plant Kirkin Road North, Pimpama	24 hour access Security access card 63mm camlock fitting
Alberton	Zipfs Park - Cricket Ground Zipfs Road, Alberton	24 hour access 63mm camlock fitting
Beenleigh	Wastewater Treatment Plan Logan Road, Eagleby	24 hour access 63mm camlock fitting

Station operating instructions

1. Park the vehicle in proximity of the filling point without obstructing other users.

2. Connect the outlet of the filling point to approved vessel.

3. Open valve to suit your requirements.

4. Place the access key on the reader for validation.

Light on = valid key – Go to Step 5.
Light flashing = invalid key – Contact Allconnex Water during office hours.

5. Press ‘ON’ button to start delivery of recycled water.

Light on = water is flowing.
Light flashing = water is not flowing – Please call Allconnex Water to report the fault.

6. Close the valve.

7. Press ‘OFF’ button to stop the delivery of recycled water.

8. Disconnect the hose.

9. Move away to allow other users to access the filling station.